Setting the iso film speed, Turn the command dial to <iso, Turn the < > until the desired – Canon EOS 3000 QD User Manual
Page 52: Iso film speed appears on the lcd panel, Turn the command dial to the desired mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Multiple Exposures
Before capturing multiple exposures on the same frame of film, exposure
compensation must be set. See "Exposure Compensation” on page 46.
As a general guide, you should set the exposure compensation amount
shown below for the respective number of multiple exposures.
No. of Multiple Exposures
S
3
4
Underexposure Amount
■1.0 stop
-1.5 stop
•2,0 slops
•These are only suggested exposure compensation amounts. The optimum
amount depends on the scene. Experiment to find the optimum
compensation amount.
Setting the ISO Film Speed
If the film is not DX-coded or if you want to set a different ISO film speed,
you can set the ISO film speed manually. The ISO film speed can be sef
from 6 fo 6400,
Turn the Command Dial to <ISO>-
• The ISO icon and the current ISO film
speed will be displayed on the LCD
panel.
[
u n n
l U U
ISO
)
Turn the <
> until the desired
ISO film speed appears on the
LCD panel.
Turn the Command Dial to the
desired mode.
n
The manually-set ISO film speed will be canceled if the film is taken out and
DX-coded film is loaded.
52