Bulb exposures, Turn the command dial to <m – Canon EOS 3000 QD User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bulb Exposures
'■J. HTItJ
When bulb is set, you can expose the film for as long as you press the
shutter button completely. Bulb exposures are useful when long exposures
are required for night scenes, fireworks, etc. In this case, Remote Switch
RS-60E3 (sold separately) is convenient since it frees you from holding
down the shutter button during bulb exposures.
i
Turn the Command Dial to <M>.
f
buib
0 n
u.u
I
U U L U
<C
IO
I
Turn the < ¿Si > until
buLb
is
displayed for the shutter speed.
•
buLb
follows 30”.
Press and hold down the <A“>
button and turn the < ¿Ss > to set
the desired aperture.
Frame the shot, then press and
hold down the shutter button
completely for the duration of the
exposure.
• The shutter remains open while the
shutter button is pressed completely.
• During bulb exposures,
buLb
blinks
on the LCD panel.
• With a new set of batteries, a bulb
exposure can be as long as about 6
hours at room temperature.
• A bulb exposure can be combined with
multiple exposures (see page 51).
50