Flash sync speeds and flash apertures, Af modes and film advance modes – Canon EOS 3000 QD User Manual

Page 57

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Reference Section

Flash Sync Speeds and Flash Apertures

Command Dial Mode

Sync Speed

Rash Aperture

P

The sync speed is set
automatically to 1/90 sec.

The flash aperture is set

automatically according to the TTL
program.

Tv

Any sync speed 1/90 sec. or
slower can be set manually.*

The flash aperture is set

automatically to match the sync

speed you set.

Av

The sync speed is set automatically
within a range of 30” to 1/90 sec. to

match the flash aperture you set.

You set the flash aperture
manually.

M

Any sync speed 1/90 sec. or
slower can be set manually.*

' If the sync speed is set faster than 1/90 sec., it will be reset automatically to 1/90 sec.

AF Modes and Film Advance Modes

Film Advance Mode

One-Shot AF

Al Servo AF

Single

The picture cannot be taken until
focus is achieved. When focus is

achieved, it also locks at the same

time. The evaluative metering’s

exposure reading is also locked.

(The exposure setting is retained

before the picture is taken.)

Autofocusing continues to match

the subject’s movement. The

exposure setting is determined at
the moment of exposure.

Continuous

The same conditions as above

apply during continuous shooting
(at about 1 frame per second).

The same conditions as above

apply during continuous shooting.
Autofocusing continues during

continuous shooting (at about 1
frame per second).

57

Advertising
This manual is related to the following products: