Setting the date and time, Replacing the quartz date back’s battery, M)o o – Canon EOS 3000 QD User Manual
Page 33: Cq)« o, Cd)# o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Imprinting the Date or Time
Setting the Date and Time
To set or change the date and
time, follow the procedure below.
1 MODE
...
(M)o o
Tin f ”¡1
1
M
1 r
SELECT SET
.
WOE
¡CQ)« o
1 SELECT SET
(D)0
MM f i (M
JU
”
CD)# O
Press the <MODE> button to
display the date or time to be set.
Press the <SELECT> button so that
the digit to be changed blinks.
Keep pressing the <SET> button
until the correct number appears.
Press the <SELECT> button until
none of the digits blink.
SELECT SET I
Replacing the Quartz Date Back’s Battery
When the date/time on the quartz date display panel or imprinted
photograph looks faded, replace the CR2025 lithium battery as follows.
Battery life is about 3 years.
Open the camera back and loosen the
screw to remove the battery chamber
cover as shown in the figure.
Take out the battery.
Insert a new battery with the
positive contact (+) facing you. Then
reattach the battery chamber cover.
Close the camera back and set
the correct date and time.
33