Feature availability table ■ itl, Feature availability table, A-dep – Canon EOS 3000 QD User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Feature Availability Table ■
itl
Command
Dial Mode
Autofocus
Film Advance
Metering Mode
One-Shot AFAI Focus
Single
Continuous Evaluative
CentBHntitiM
averaged
Partial
o
•
•
•
•
•
•
Sâ
•
•
•
•
•
•
•
•
•
P
•
•
•
Tv
•
•
•
Av
•
•
•
M
•
•
•
A-DEP
•
•
•
•*
■ Available only while the partial metering button is pressed
' In the <M> mode, centerweighted averaging metering is used
One-Shot AF
AI Focus AF
Continuous advance
Evaluative metering
Partial metering
Centerweighted
averaging metering
34
The exposure setting (shutter speed and aperture) is set when focus is
achieved. The picture cannot be taken unless the subject is focused.
The AF mode is set automatically to suit the subject’s movement when the
shutter button is pressed
If the subject is still, the focus is locked when focus is achieved (One-Shot
AF). If the subject is moving, focusing is continuous and predictive AF is used
so that the subject is in focus at the moment of exposure.
While the shutter button is held down, the camera can shoot continuously as
fast as 1 frame per second
This is suited for most picture-taking situations
including backlit conditions The subject's position and
brightness, the background, the existing light, backlight
conditions, etc., are taken into account to set a
suitable exposure setting
The exposure setting is based on the brightness of the
area covered by the partial metering circle on the
viewfinder screen. It is effective for backlit subjects.
The metering is weighted at the center and then
averaged for the entire scene