Camera recording, Attach power source, Press operate button – Canon E800 User Manual
Page 33: Press eject button, Press tape speed button to select tape speed, Press start/stop button, Turn grip for easy handling
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera Recording
Attach power source.
• When using a battery pack, make sure it is fully charged (see p.ll).
Press OPERATE button.
• OPERATE/CAUTION indicator lights up.
EJECT
Press EJECT button.
• Video cassette compartment opens.
4
Push
0 : 0 0
0 0 ’’
P A U S E
k ______ ____ ___ J
TAPE SPEED
rSPi/LP
Load video cassette and close video cassette
compartment.
• Insert with window facing out.
• Camera goes into record pause mode.
• Camera goes into stop mode if the erasure prevention switch on the video
cassette is ON (see p.23).
Press TAPE SPEED button to select tape speed.
• For best picture quality, select SP.
• For double recording time, select LP.
Turn grip for easy handling.
• See p.l8 for adjusting grip.
Press START/STOP button.
• Recording starts.
• Tally lamp flashes rapidly and “REC” appears in viewfinder.
• See Advanced Functions section for information on making your
recordings more effective (pp.36—57).
8
20
Press START/STOP button again to temporarily pause
recording.
• Press START/STOP button once again to resume recording.
• See “Record Review” (p.25) to check your recording.