Canon E800 - Manual (Page 66)

Recording Titles
r
P A U S E
Place camera in record pause mode.
Press START/STOP button to start recording.
DISPLAY -IDIGITAL1-,
.o!Sl 1
iriTLEl
DISPLAY
ICHARACTERl
DISPLAY—I DIGITAL
0
1
I TITLE I
DISPLAY
Eg'
CHARACTERl
Press DISPLAY (Character Title) or DISPLAY (Digital Title)
button.
• Press DISPLAY (Character Title) button for character title, and DISPLAY
(Digital Title) button for digital title.
• Press CHARACTER TITLE button on wireless controller for character
title.
• Title appears in viewfinder.
• Title will be recorded with scene.
• Reverse steps 2 and 3 if you want the title to appear right at the beginning
of recording.
Press DISPLAY (Character Title) or DISPLAY (Digital Title)
button again to end title recording.
• Title disappears from viewfinder and recording continues.
Adjusting Image Density (Digital Title)
The camera may have difficulty memorizing images with thin lines or weak
contrast. In this case, press and hold MEMO button for more than three
seconds to adjust image density (16 levels). Levels change continuously as
follows:
—»-Thinnest -► 8 levels -► Original Image 8 levels -► Thickest-------------- 1
Notes:
• Because the viewfinder is black and white title changes contrast to the selected colour. If you select the same
colour for titles and backgrounds, you may have troubles recognizing tities. Select bright titles for dark
backgrounds and dark titles for bright backgrounds.
• Tities cannot be created during recording.
• Tities cannot be created and superimposed in playback mode.
• The lithium battery aliows the camera to store titles even when the camera is turned off. When you change or
remove the lithium battery (lifetime is about one year), be sure to connect the camera to another power source
first, otherwise title setting will be cleared from memory.
• Colour of titles can be changed during recording.
Add Titles to Recordings
53