When recording has ended, press eject button, Press operate button – Canon E800 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Use video cassettes marked with the HilO (E5 type) or Ш (P5 type).

EJECT

When recording has ended, press EJECT button.

• Video cassette compartment opens.

10

Push

Remove video cassette and ciose video cassette

compartment again.

11

Press OPERATE button.

• OPERATE/CAUTION indicator goes off.

Video Cassette

Compartment

- EJECT Button

- OPERATE/CAUTION

Indicator

OPERATE Button

REC Button

Tally

Lamp

Battery Pack

L_

GRIP UNLOCK
Switch

Thumb Rest

START/STOP Button

• A standard 8mm video cassette cannot be recorded in Hi8 mode.

• It

is impossible to record in standard mode with hliElvideo cassette.

Hint:

REC

r Л

o/m

(Wireless

Controller)

^ P A и S E ^

Press REC button to begin recording from the stop mode.

• The camera enters record pause mode.
• Use the normal recording procedure for recording.

Notes:

• The tape counter will be reset to 0:00:00 when a video cassette is loaded.
• The camera automatically turns off if record pause mode lasts more than approximately seven minutes. To

resume recording turn camera on and press START/STOP button.

• Check the viewfinder display for correct mode during shooting for security. (For details, see p.14 and 15.)
• Avoid pressing START/STOP button repeatedly. Put a sufficiently long interval in between, otherwise trouble may

result.

• Avoid recording near sources of electric or magnetic fields, such as a TV tower, which can cause noise in the

picture or a camera malfunction.

• If tape speed is changed during recording, the tape will contain noise at that point.
• When recording in dark places; if a bright object, such as a candle flame enters the picture, a luminous bar

may appear vertically on the screen.

Camera Recording

21

Advertising