Mounting and detaching a lens, Mounting a lens, Remove the caps – Canon Rebel Ti 300V User Manual
Page 16: On the lens, set the focus mode, Detaching the lens
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting and Detaching a Lens
Mounting a Lens
Remove the caps.
• Remove the rear lens cap and the
camera body cap.
Mount the lens.
• Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
On the lens, set the focus mode
switch to <AF>.
• If the focus mode switch is set to
<MF>
(or
<M>
on older lenses),
autofocus will not operate and <EB ;
will be displayed on the LCD panel
Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
• When the red dot on the lens is at the
top, remove the lens.
31
16
' Keep the removed caps where you will not lose them
’ “AF” stands for Autofocus.
' “MF" (or “M”) stands for Manual Focus.