Quick start guide, Install the batteries, F focus the subject – Canon Rebel Ti 300V User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Quick Start Guide
cs
^ f ( 1
^
I
Install the batteries.
Insert two CR2 lithium bat
teries as shown by the bat
tery orientation diagram on
the battery compartment
cover, (^page 14)
%
Align the red dots on the
lens and camera and turn
the lens as shown by the
arrow until it snaps into
place, (^page 16)
5
Load the film.
Align the edge of the film
with the < A > mark, and
close the back cover until it
snaps shut, (^page 18)
• The film will then advance
to the first frame
automatically.
'f
Focus the subject.
"h- Aim the AF point on the
'■ subject and press the shut
ter button halfway to auto
focus. (^page 22)
• Under low-light or backlit
conditions, the built-in flash
will pop-up and fire
automatically. (->page 49)