Setting the date and time, В ib'ob – Canon Rebel Ti 300V User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0Ш1 Imprinting the Date or Time
(
date
Model only)
I
Setting the Date and Time
<1 Move the < ^ > arrow to < ПИП >.
• Look at the LCD panel and press the
<FUNC> button.
► If the date and time has not been set,
“......... ” will blink on the LCD panel.
"% Select the digit to be set.
• Press the <Hill> button.
• The digit selection will change in the
following sequence: year, month, day,
hour, minute, “”.
^ Set the correct number.
• Turn the
dial.
• Repeat steps
1
and 3 until all the
date and time digits are set correctly.
A Finalize the date and time setting.
^ • Keep pressing the <Hli)> button until
no digits are blinking.
• If you press the <1Ш1> button while
“.' ” is blinking,
0
sec. will be set.
1 'ог^
в IB'OB^
^ If a picture is taken while the date and time are Winking, the date and time will not
be imprinted on that picture.
S The date and time setting can be retained for about 10 min. after the cam
era’s batteries are removed.
30