Af mode, Af mode and film advance mode – Canon Rebel Ti 300V User Manual

Page 55

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

AF Mode

One-Shot AF

When focus is achieved, the exposure setting is set simultaneously and

the focus is locked- The shutter cannot be released until focus is achieved.

Al Servo AF

Ideal for moving subjects. The moving subject is focused continuously

while the camera predicts the subject's point of focus for when the shut­
ter is released. The exposure is set when the shutter is reieased.

Al Focus AF

When you press the shutter button, the AF mode (One-Shot AF or Al

Servo AF) is set automatically depending on whether the subject is
moving or not.

AF Mode and Film Advance Mode

Film Advance Mode

One-Shot AF

Al Servo AF

Single frame

The picture cannot be taken

until focus is achieved. When

focus is achieved, it also

locks at the same time. The
evaluative metering's expo­
sure reading is also locked

(The exposure setting is

retained until the picture is

taken.)

Autofocusing continues to

match the subject’s move­
ment The exposure setting is

determined at the moment of

exposure

Continuous

The same conditions as

above apply during continu­
ous shooting (at about 2 5

frame per second).

The same conditions above

apply during continuous
shooting, Autofocusing con­
tinues during continuous
shooting (at about 2.3 frame
per second).

I

55

Advertising