Turn the command dial to <m, Y set the shutter speed to “ bulb, Start the bulb exposure – Canon Rebel Ti 300V User Manual
Page 47: Bulb exposures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bulb Exposures
A bulb exposure starts when you press the shutter button fully and ends
when you release the shutter button. Bulb exposures are useful when long
exposures are required for night scenes, fireworks, astronomicai photogra
phy, etc.
Turn the Command Dial to <M>.
"y Set the shutter speed to “
buLb ”■
• Turn the <
£Si >
diai until “
bui
b ” is
dispiayed on the LCD panei.
• “buLb”foliows “3u"”.
Start the bulb exposure.
• Press and hold down the shutter
button.
► During the bulb exposure, “ buLb ”
blinks on the LCD panel.
• The bulb exposure continues as iong
as you hold down the shutter button.
a
■ Remote Switch RS-60E3 (optional) is recommended for bulb exposures.
' Bulb exposures can also be taken with wireless remote control (optional).
Press the transmit button to start the exposure, and press it again to stop
the exposure. (DATE Model only)
• With a new set of batteries, the maximum bulb exposure time (at 20’C) will
be about 4 hours.
I
Press and hold down the < Av +/—>
button and turn the <£2i> dial to
set the desired aperture.
47