Canon Rebel Ti 300V - Manual (Page 19)

4>
i
The shutter curtains have been manufactured with very high precision.
Never touch them with your fingers. When ioading film, do not touch or dam­
age the curtains with your fingers or film.
In hot and humid environments, do not remove the film packaging until you
are ready to load the film,
' if the film is not loaded properly, the <@> icon will blink on the LCD panel
and the shutter will not work. Reload the film cartridge properly, (^page 18)
- If you want to set a film speed different from the DX-coded film speed or if
the film cartridge is not DX-coded, see “Setting the ISO Film Speed" on
page 50
‘ Infrared film cannot be used with this camera
Checking the Film Speed
The camera reads the film cartridge's DX code and sets the film speed
automatically within ISO 25 - 5000.
* Set the Command Dial to a Creative Zone mode.
Press the <FUNC.> button and
move the <►> arrow to <ISO> on
the LCD panel.
► The film speed will appear on the
LCD panel.
Unloading Film
After the film's last frame is exposed, the camera rewinds the film automatically.
n
After the film is rewound, there will be a
shutter-release sound. Check that the
<@> icon is blinking on the LCD panel,
then open the back cover and take out
the film cartridge.
19