Catler JE 8010 - Manual (Page 13)

OPERATING YOUR JE 8010 JUICER
STEP 1.
Wash your selection of fruit and vegetables
ready for juicing.
NOTE:
Most fruit and vegetables such as apples,
carrots and cucumbers will not need to be
cut to size as these will fi t into the feed chute
whole. When juicing carrots place the tip of
the carrot into the feed chute last.
STEP 2.
Ensure the JE 8010 Juicer is correctly assembled.
Ensure the Stainless Steel Filter is thoroughly
cleaned before each use (refer to cleaning on
pages 17-18). Ensure you place the Juice Jug (or
glass) under spout before commencing juicing.
STEP 3.
Plug the power cord into a 230/240V power
outlet and then turn the power ‘ON’. Push the
Two Speed switch either up for low speed or
down for high speed depending on the type
of fruit or vegetable being juiced and the unit
will automatically start. Use the speed selector
table as a guide for juicing diff erent fruit and
vegetables.
STEP 4.
With the motor running, place food into the
Feed Chute. Using the Food Pusher, gently
guide food down the Feed Chute. To extract
the maximum amount of juice, always push the
Food Pusher down slowly.
STEP 5.
Juice will fl ow into the Juice Jug and the
separated pulp will accumulate in the Pulp
Container.
11 11
OPERATING YOUR JE 8010 JUICER
WARNING:
NEVER USE FINGERS TO PUSH FOOD DOWN THE FEED CHUTE OR TO CLEAR THE FEED
CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED.
SPEED SELECTOR TABLE
APPLES HIGH
APRICOTS LOW
BEETROOT HIGH
BLUEBERRIES LOW
BROCCOLI LOW
BRUSSELS SPROUTS HIGH
CABBAGE LOW
CARROTS HIGH
CAULIFLOWER LOW
CELERY HIGH
CUCUMBER LOW
FENNEL HIGH
GRAPES (SEEDLESS) LOW
KIWI FRUIT LOW
MANGOES LOW
MELONS LOW
NECTARINES (STONE REMOVED) LOW
ORANGES (PEELED) HIGH OR LOW
PEACHES (STONE REMOVED) LOW
PEARS HIGH FOR HARD
OR LOW FOR SOFT
PINEAPPLE HIGH
PLUMS (STONE REMOVED) LOW
RASPBERRIES LOW
TOMATOES LOW
WATERMELON LOW