Catler JE 8011 - Manual (Page 13)

13 13
ASSEMBLING YOUR JE 8011 JUICER
FOR USE WITH PUREE EXTRACTOR
Place the motor base on a flat dry surface such as a bench top. Ensure that the motor base is switched “OFF” at the control panel, then switch the appliance
“OFF” at the power outlet and unplug the cord.
STEP 1
Place the Filter Bowl Surround on the top of the
Motor Base.
STEP 2
Place the Puree Disc into the Filter Bowl Sur-
round and onto the Motor Drive Coupling Push
down until it clicks into place. Ensure the Puree
Disc is fitted securely inside the Filter Bowl Sur-
round and onto the Motor Base.
NOTE:
Never use Puree Disc without Puree
Insert. They must always be used to-
gether.
STEP 3
Place the Puree Insert into the Filter Bowl Sur-
round, making sure the warning label on the
handle is facing upwards.