Catler JE 8011 - Manual (Page 9)

9 9
ASSEMBLING YOUR JE 8011 JUICER
STEP 1
Place the Filter Bowl Surround on the top of the
Motor Base.
STEP 2
Align the arrows on the Juice Disc with the ar-
rows on the Motor Drive Coupling and push
down until it clicks into place. Ensure the Juice
Disc is fitted securely inside the Filter Bowl Sur-
round and onto the Motor Base.
STEP 3
Place the Juicer Cover over the Filter Bowl Sur-
round, positioning the Juicer Cover over the
stainless steel filter disc and lower into position.
ASSEMBLING YOUR JE 8011 JUICER
Before first use
Before using your Catler JE 8011 Juicer for the first time, remove and safely discard any packaging material and promotional labels. Ensure the appliance
is switched off at the power outlet and the power cord is unplugged.
Wash the Filter Surround, Juice Disc, Puree Disc, Puree Insert, Juicer Cover, Food Pusher, Juice Jug, Juice Jug Lid and Pulp Container in warm soapy water
with a soft cloth or nylon brush. Rinse and dry thoroughly.
FOR USE WITH JUICE EXTRACTOR
Place the motor base on a flat dry surface such as a bench top. Ensure that the motor base is switched “OFF” at the control panel, then switch the appliance
“OFF” at the power outlet and unplug the cord.
 
 
 