BoonDocker POLARIS: 2011-14 PRO RMK 800 - Manual (Page 3)

BoonDocker RMK Turbo
Revised 11/5/2012 Page 3 of 13
www.boondockers.com……………….....
BoonDocker
……….………………....877-522-7805
1. 2. Remove stock air box, remove fuel filter and fuel
line bracket. Sand back surface flat for mounting.
3.Remove factory TBAP sensor from stock air box
and tip tie to the over structure.
4. Remove the stock oil tank.
5. With ECU in place, hold the sanded fuel filter
bracket in place on the back side of clutch cover to
ensure proper fit. Drill a 1/4” hole in the clutch cover
tab for fuel filter bracket mounting. 6. Snap the fuel filter and fuel line into the mounting
bracket and secure to clutch cover using the 1/4” bolt
and lock nut. Reinstall the oil tank.
1. 1. Remove side panels, hood, seat, fuel tank, and
muffler. Save exhaust springs and rubber muffler
mounts for turbo install.