BoonDocker POLARIS: 2011-14 PRO RMK 800 - Manual (Page 5)

BoonDocker RMK Turbo
Revised 11/5/2012 Page 5 of 13
www.boondockers.com……………….....
BoonDocker
……….………………....877-522-7805
13.Remove the Velcro from the turbo oil pump, clean
and warm the bulkhead surface and attach Velcro as
shown.
14. Attach the rubber exhaust mounts to turbo oil
tank as shown .
Note : 2011-12’ are different than
2013’.
15. Hang the turbo assembly in place using the stock
muffler mounting locations, make sure turbo sits
down on rubber mounts and secure oil pump to Vel-
cro. Check oil line routing. 16. Lower coolant level in bottle, remove throttle
body coolant line. Route inside turbo coolant line to
coolant bottle. Proper routing will avoid pull rope,
and sharp edges
17. Route outside coolant line to throttle bodies and
secure using supplied hose clamps.
(Stainless TIAL Performance exhaust install proceed
to step #25 Kick plate installation)
18. Install exhaust outlet to turbo using 5 black
socket head bolts. Run a bead of silicone around muf-
fler flange to ensure seal , Install muffler using sup-
plied springs.