BoonDocker POLARIS: 2011-14 PRO RMK 800 - Manual (Page 7)

BoonDocker RMK Turbo
Revised 11/5/2012 Page 7 of 13
www.boondockers.com……………….....
BoonDocker
……….………………....877-522-7805
25. Install foot rest kick plate. (Tial install starts here,
non Tial skip to step 38).
(Note: install kick plate on
Tial performance upgrade at THIS time BEFORE
installing muffler, only install the Two bottom rivets
on running board at this time)
26. Remove the stock pipe and exhaust donut, run a
bead of silicone around inside and reinstall on Y-
pipe,
Note: make sure to align notches on Y-pipe to
donut
27.Run a bead of silicone on the inside of the flange
on the exhaust pipe.
28. Install springs from pipe to Y-pipe 2-springs on
side spring tabs and 3-springs on top spring tab.
29.Run a bead of silicone on inside of the small ex-
haust donut and install on pipe
30. Run a bead of silicone on inside bell of turbo inlet
pipe.