Cuddeback E FAMILY - Manual (Page 11)

how much battery power is used to take a picture
or video.
Day Images require the least amount of battery
power and are counted as 1Battery Image.
Video and Night Images require more power
than day images and will increase the BI count
by more than 1 depending upon how much
power they consume.
CLEAR. This command clears the SD card (WARNING:
ALL FILES ON THE SD CARD WILL BE ERASED).
Press UP or DOWN to activate this command. You
will be asked to CONFIRM the operation. Press
UP or DOWN again to confirm. If you do not want
to CLEAR wait a few seconds and the CONFIRM
prompt will vanish and the operation is canceled.
IM COPY. This command copies images saved in
internal memory (IM) to the SD card. Press UP or
DOWN to initiate copying. You will be asked to
CONFIRM the operation. Press UP or DOWN to
confirm and images will be copied to the SD card.
DST MODE. Daylight Savings Time. For USA
users you can have the camera automatically adjust
for spring and autumn daylight savings time
changes. Press UP or DOWN to select AUTO or
OFF. In AUTO mode DST clock adjustments are
done automatically.
F/W VER. Displays the camera’s firmware version.
LOAD F/W. This will load a new firmware file from
a SD card. See Appendix A: Firmware section latter
in this manual.
SETUP. You can change setup mode to ADVANCED
(ADV) or EZ. Default mode is EZ. Advanced Mode
enables numerous additional features. Press UP or
DOWN to change Setup Mode from EZ to Advance.
See Advanced Mode section latter in this manual.
STATS. Displays operating history statistics. Press UP
or DOWN to display: Activation Date, Lifetime Days,
Run Days, Lifetime Images, Lifetime Flash images.
✓
Activation Date is the day your warranty begins.
It is set automatically when batteries are installed.
18 19