Cuddeback E FAMILY - Manual (Page 19)

2. Press MORE until SETUP is displayed.
3. Press UP or DOWN to select ADV MODE.
4. Press MORE to retain the viewed setting.
The following sections explain the differences and
additions to topics covered previously.
Command Menu
Advanced mode enables additional COMMANDS
that allow you to change camera performance.
1. Press MODE until COMMAND LED is
illuminated
2. Press MODE consecutive times to scroll
through the available test items.
a. CLEAR – press UP or DOWN to clear
the SD card. CONFIRM will be displayed.
Press UP or DOWN to confirm that you
want to clear the SD card.
b. ASPECT – this selects the format of the
image. Select WIDE view or FULL view.
WIDE is the modern 16 x 9 format, and
FULL is the traditional 4 x 3 format.
c. STILL SZ – select 5MP or 20MP.
d. LAPSE SZ – select 1MP, 5MP, or 20MP.
Note, the bigger the image size the more
space on the SD card is required. We
recommend 1 MP when time lapse is
set to 1 minute or less.
e. DST MODE – For USA users select daylight
saving time mode to AUTO for automatic
time adjustment for daylight savings time.
For other users select OFF.
f. F/W VER – firmware version.
34 35