Dynojet 250iP: Air Brake and EEC Kit - Manual (Page 21)

I N S T A L L A T I O N G U I D E
Air Brake
Version 1 Air Brake and EEC Kit Installation Guide for 200i/250i and 200iP/250iP Motorcycle Dynamometers
17
A DJUSTING THE B RAKE P AD C LEARANCE
Before you tighten the bolts securing the brake caliper stop you will want to adjust
the brake pad clearance.
1
Release the brakes.
Note: In order for the brakes to release, power must be on, air connected, red
button on pendant not lit, and the emergency stop button not depressed.
2 Insert the brake adjusting shim between the inboard brake pad and the brake
rotor.
Figure 18: Adjusting the Brake Pad Clearance
brake adjusting shim
inboard brake pad
rotor
brake caliper stop bolts