Dynojet 250iP: Air Brake and EEC Kit - Manual (Page 35)

I N S T A L L A T I O N G U I D E
Door Safety Switch
Version 1 Air Brake and EEC Kit Installation Guide for 200i/250i and 200iP/250iP Motorcycle Dynamometers
31
I NSTALLING THE D OOR S AFETY S WITCH —200 I P/250 I P
1 Open the CPI front panel access and turn off the main breaker.
2 Unplug the dyno power cable.
3 Remove the eight button-head screws securing the CPI cover and set aside.
4 Remove the cover and set aside.
Figure 31: Accessing the CPI
PD027
cover
front panel access