Habey BIS-6650 User Manual
Page 36
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater than 3. The default is
Disabled because this problem does not exist in the Windows series operating systems. If you
are using an operating system other than Windows, this problem may occur. To avoid this
problem, enable this field to limit the return value to 3 or lesser than 3.
EIST
To enable or disable the Enhanced Intel SpeedStep Technology (EIST). Enhanced Intel
SpeedStep Technology allows the system to dynamically adjust processor voltage and core
frequency, which can result in decreased average power consumption and decreased average
heat production
CPU C state Report
Enable or disable the CPU C-states.
3.2.4 SATA Configuration
BIOS SETUP UTILITY
SATA Configuration
SATA Ports (0-3) Device Names if
Present and Enabled.
Serial ATA Port1
Not Present
Serial ATA Port2
Not Present
Serial-ATA Controller(s)
[Enabled]
SATA Mode
[AHCI]
Serial ATA Port1
[Enabled]
Serial ATA Port2
[Enabled]
→←：
Select Screen
↑↓：
Select Item
Enter：Select
+/-：Change Opt.
F1：General Help
F9：Optimized Defaults
F10：Save&Exit
ESC：Exit
Version 2.10.1208. Copyright（C）2010 American Megatrends，Inc.
Serial-ATA Controller（S）
30