Habey BIS-6650 - Manual (Page 37)

To enable or disable the SATA controller (S).
SATA Mode
To configure the SATA Mode：[AHCI] or [IDE].
Serial ATA Port1/2
To enable or disable the two ports (SATA & CF) under AHCI mode.
3.2.5 USB Configuration
BIOS SETUP UTILITY
USB Configuration
Enable / Disable USB Function.
USB Devices：
1 Keyboard ,1 Mouse
USB function [Enabled]
USB 2.0 (EHCI) Support [Enabled]
Legacy USB Support [Enabled]
Mass Storage Devices;
KingstonDataTraveler G2 PMAP
[Auto]
→←： Select Screen
↑↓： Select Item
Enter：Select
+/-：Change Opt.
F1：General Help
F9：Optimized Defaults
F10：Save&Exit
ESC：Exit
Version 2.10.1208. Copyright（C）2010 American Megatrends，Inc.
USB function
This option is used to enable or disable the USB port.
USB 2.0 (EHCI) Support
[Enabled]: Enable USB EHCI (USB 2.0) functions, max. transmission rate upto 480Mpbs
[Disabled]: Disable USB2.0 function. The transmission rate is 12Mpbs.
Legacy USB Support
To support USB device in DOS mode: such as USB Flash Disk, USB keyboard, please select
<Enabled> or<Auto>.
31