Habey BIS-6650 - Manual (Page 52)

Appendix 3: GPIO Instruction
MITX-6854 provides a twelve way input and a twelve way output programable interface. Input
and output of the interfaces are independent. In the GPIO interface, there are 26 Pin which are
link to 24 digital bits. This interface is generated by the onboard chip on PCI bus, and the bus
number is 0, device number is 18 and function number is 0. This interface is using the 3rd basic
address register. According to PCI standard, the basic address are allocated by the BIOS
dynamically, and it is a MUST normally to obtain the basic address before program this
interface(if there are no other PCI expansion device, the basic address is: CC00H).
GPIO's interface debugging program is attached in the CD in the accessory box . Running the
GPIO executable file will start the GPIO debug program.
46