Habey BIS-6650 - Manual (Page 38)

If not , please select < Disabled>
Mass Storage Devices
To select the types of the connected USB devices. [Auto], or [ floppy] or [Forced FDD], [HDD ]
or CD-ROM. System defaults as [Auto].
3.2.6 Supper IO Configuration
BIOS SETUP UTILITY
Super IO Configuration
Set Parameters of Serial Port 1
（ COMA）
Serial Port 1 Configuration
Serial Port 2 Configuration
→←： Select Screen
↑↓： Select Item
Enter：Select
+/-：Change Opt.
F1：General Help
F9：Optimized Defaults
F10：Save&Exit
ESC：Exit
Version 2.10.1208. Copyright（C）2010 American Megatrends，Inc.
Serial Port 1 Configuration
1）Serial Port
To enable or disable the serial port functions. Set Parameters of Serial Port 1.
2）Device Setting（Read Only）
Display serial port IRQ and base address.
3）Change Setting
To change serial port settings. Recommend to select [Auto].
Serial Port 2 Configuration follows the same steps as above.
32