Habey BIS-6650 - Manual (Page 47)

4.2 Replace DIMM
BIS-6650 provides one standard 2GB DDRII RAM. If customers need to change it, please
note its capacity and its specification. Please follow the steps below to replace the memory
bank:
1. Please read and follow the steps mention in the section “Before disassembling or assembling
the computer components”
2. Use screwdriver to unscrew the L shape bottom cover , then you will see the memory slot
and CF card socket.
3. Hold the memory clips and force down both sides of it evenly, until the memory bank pops-up
4 . Align the memory golden finger with the socket
5. Insert and push the memory into the socket onboard, then press down the memory.
6. Mount the L shape bottom cover
7. Connect the computer and devices with power supply line, then turn on power
8. Right click the “My Computer” icon on the desktop and then click the “Properties”
9. Click “General” option tab
10. If you want to check the installation, please check the listing memory size.
4.3 Install CF Card
BIS-6650 provides one standard 50Pin CF card socket. Please follow the steps below to
install the CF Card:
1. Please read and follow the steps mention in the section “Before disassembling or assembling
the computer components”
2. Use screwdriver to unscrew the bottom cover , then you will see the memory slot and CF
card socket.
3. Select a matching CF card, then insert it into the CF Card Socket.
41