Habey BIS-6650 - Manual (Page 41)

LAN2 Controller [Enabled]
Restore AC Power Loss [Power On]
Power On Bypass [Disabled]
Power Off Bypass [Disabled]
→←： Select Screen
↑↓： Select Item
Enter：Select
+/-：Change Opt.
F1：General Help
F9：Optimized Defaults
F10：Save&Exit
ESC：Exit
Version 2.10.1208. Copyright（C）2010 American Megatrends，Inc.
LAN 1-4 Controller
To enable or disable onboard LAN controller for LAN1 to LAN4.
Restore AC Power Loss
To select the computer starting up status after restoring the AC power
[Power Off]: press the power buttong to start the computer;
[Power On]: Computer starts up directly after restoring the AC power;
[Last State]: Return to the last status when the AC power loss。
Bypass Power On
Enable or disable the bypass function when system power on
Bypass Power Off
Enable or disable the bypass function under Power Off Status.
3.4 Boot Menu
BIOS SETUP UTILITY
Boot Configuration
Setup Prompt Timeout 1
Number of seconds to wait for
setup activation key. 65535(0×
FFFF) means indefinite waiting.
35