4 technical specifications, 4 technical specifications - 11, Vmp3 main specifications - 11 – Kontron VMP3 User Manual

Page 31: Vmp3 introduction

Advertising
background image

VMP3

Introduction

ID 29230, Rev. 01

© 2005 Kontron Modular Computers GmbH

Page 1 - 11

29230

.01.UG.VC.050727/091419

P R E L I M I N A R Y

1.4

Technical Specifications

Table 1-2: VMP3 Main Specifications

VMP3

Specifications

Processor and

Related

Processor

Motorola MPC8541E Integrated Processor PowerPC, e500 core

Cache Structure

32 KB instruction cache and 32 KB data cache; L2 cache: 256 KB

On Chip Controllers

Coherency Module, DDR-SDRAM, OCeaN switch fabric, Local Bus, FCC, TSEs,
Security Engine

Main Memory

Soldered DDR-SDRAM: up to 256 MB, 64-bit, 264 MHz with ECC

Watchdog

Watchdog generates exception condition: system reset, NMI, or cascading

RTC

Real-time clock, backed up via VME auxiliary power (+5VSTDBY)

BPCC

E²Brain™ Board Process/Communications Controller: controls Local Bus
interfacing, provides LPC interface and monitor and control functions

Peripheral

Memo

ry

SRAM

1 MB soldered, 512k x 16, optionally backed up via auxiliary power (+5VSTDBY)

EEPROM (I²C)

64 kBit soldered, serial access

Flash

Minimum of 4 MB and up to 64 MB soldered

External Interfaces

VME

ANSI/VITA 1-1994 for VME, approved April 10.1995
Support for A24:D16/8 master and A24:D16/8 slave interface

PCI

On-chip controller, 32-bit, 33 MHz, PCI System Master

LPC

Low Pin Count sub-set, 8-bit IO and memory space access, realized in BPCC

I²C

On-chip, message interface, full master/slave

CF

CompactFlash, optional (PIO mode)

Fast Ethernet

One 10baseT, 100baseTX, FCC integrated in MPC8541E, Intel PHY: LXT 972

Gigabit Ethernet

Two three speed Ethernet (TSE): 10/100/1000 Mbit GMII (Marvell PHY: 88E1011)

CAN

Controller Area Network interface (Philips SJA1000)

Serial Ports

Terminal and Console:
Two serial ports:

RS232: TERM1 (Terminal on front panel)

TTL: TERM2 (Console on I/O expansion)

High Speed Serial:
Four ports, full modem

: SER1 (on I/O expansion)

(Local Bus)

: SER2 (on I/O expansion)

(Support for RS485 direction control)

: SER3 (on I/O expansion)
: SER4 (on I/O expansion)

T/P

Interfaces

JTAG/Debug

JTAG/Debug interface for MPC8541E emulation probe

In-System
Programming

In-System-Programming interface for the VMP3 CPLD logic device

Advertising