Oem commands and command extensions, 1 get device id command with oem extensions, Get device id command with oem extensions – Kontron CP6002 IPMI User Manual
Page 27: Cp6002 ipmi firmware user guide
CP6002
IPMI Firmware User Guide
ID: 1039-1613, Rev. 2.0
Page 27
10.
OEM Commands and Command Extensions
10.1
Get Device ID Command with OEM Extensions
The IPMI specification defines four optional bytes in the response to 'Get Device ID'. The re-
sponse bytes [13:16] hold the 'Auxiliary Firmware Revision Information'.
Table 5:
Get Device ID Command with OEM Extensions
COMMAND
LUN
NetFn
CMD
Get Device ID command with OEM extensions
00h
App = 06h
01h
REQUEST DATA
Byte
Data Field
-
-
RESPONSE DATA
Byte
Data Field
1
Completion Code
2:12
Regular Get Device ID Command response fields
13
Release number of the management controller firmware:
10h for R10,
11h for R11,
…
Release number 1… of the IPMI controller firmware. The open ipmi tool ‘ipmitool’ displays this
as ‘SDR’ in the response to the command ‘ipmitool fwum status’.
14
Module Geographical Address (slot number):
1 … = Module in chassis slot 1…
15
Reserved
16
Reserved