2 board specific fru data, 3 downloading the fru data, Cp6002 ipmi firmware user guide – Kontron CP6002 IPMI User Manual
Page 37
CP6002
IPMI Firmware User Guide
ID: 1039-1613, Rev. 2.0
Page 37
12.2
Board Specific FRU Data
Supported are the following FRU data areas and data fields:
FRU Board Info Area
• Manufacturing date / time
• Board manufacturer
(C7): “Kontron”
• Board Product Name
(C6): “CP6002”
• Board Serial Number
(CF): “123456789012345”
1)
• Board Part Number
(C9): “123456789”
1)
• FRU File ID
(C7): “STD_R10”
FRU Product Info Area
• Product manufacturer
(C7): “Kontron”
• Product Name
(C6): “CP6002”
• Product Part Number
(C2): “00”
1)
• Product Version
(D9): “0000000000000000000000000”
2)
• Product Serial Number
(D9): “0000000000000000000000000”
2)
• Asset Tag
(D9): “_________________________”
2)
• FRU File ID
(C7): “STD_R10”
• CustomData
(D5): “MAC=CC:CC:CC:CC:CC:CC”
1)
1)
Field will be modified during the manufacturing process
2)
Field is free for user. Please note that changes need special care (checksums).
12.3
Downloading the FRU Data
Normally a download of the FRU data is not required because the module is supplied with it
before shipping.
But if needed the standard way to download FRU information to the module is to use the open
tool ‘ipmitool’ for the download of an image file (e.g. ‘ipmitool fru write 0 <file name>’).
All IPMI interfaces which are offered by ‘ipmitool’ are usable. This allows local upgrade or re-
mote upgrade. Please note that the KCS interface is only usable on a powered payload.
Please note that the writing of FRU data while the board is write protected will have no effect.