Kontron AM4211 - Manual (Page 49)

34 AM4211
www.kontron.com
5.1.2.1.2 Kontron IPMB-L Link
5.1.2.1.3 Kontron MMC Firmware Upgrade Status
Table 5-3:Kontron IPMB-L Link sensor
Event/Reading type
code Sensor type Sensor specific offset Event trigger
6Fh
C3h
OEM Kontron
IPMB-L Link
02h
IPMB-L Disable
Event Data 2: always 0
Event Data 3:
bit[7:3]: always 0
bit [2:0]:
0h = no failure
1h = Unable to drive clock HI
2h = Unable to drive data HI
3h = Unable to drive clock LO
4h = Unable to drive data LO
5h = clock low timeout
6h = Under test (the IPM Controller is attempting to
determine who is causing a bus hang)
7h = Undiagnosed Communication Failure
03h
IPMB-L Enable
Event Data 2: always 0
Event Data 3:
bit[7:3]: always 0
bit [2:0]:
0h = no failure
1h = Unable to drive clock HI
2h = Unable to drive data HI
3h = Unable to drive clock LO
4h = Unable to drive data LO
5h = clock low timeout
6h = Under test (the IPM Controller is attempting to
determine who is causing a bus hang)
7h = Undiagnosed Communication Failure
Table 5-4:Kontron MMC FW upgrade status sensor
Event/Reading type
code Sensor type Sensor specific offset Event trigger
6Fh
CAh
OEM Kontron
External
Component
Firmware Upgrade
Status
00h Firmware Upgrade in Progress (no event)
01h Firmware upgrade succeeded
02h Firmware upgrade failed