Kontron AM4211 - Manual (Page 50)

35 AM4211
www.kontron.com
5.1.2.1.4 Kontron Reset
5.1.2.1.5 Kontron User SW UpgradeStatus
Table 5-5:Kontron reset sensor
Event/Reading type
code Sensor type Sensor specific offset Event trigger
03h
CFh
OEM Kontron
RESET
00h
01h
State Asserted /
State Deasserted
Event Data 2: Reset Type
00h: Warm reset
01h: Cold reset
02h: Forced Cold [Warm reset reverted to Cold]
03h: Soft reset [Software jump]
Event Data 3: Reset Source
00h: IPMI Watchdog [cold, warm or forced cold]
(IPMI Watchdog2 sensors gives dditional details)
01h: IPMI commands cold, warm or forced cold]
(chassis control, fru control)
02h: Processor internal checkstop
03h: Processor internal reset request
04h: Reset button [warm or forced cold]
05h: Power up [cold]
06h: Legacy Initial Watchdog / Warm Reset Loop Detection
* [cold reset]
07h: Legacy Programmable Watchdog [cold, warm or forced
cold]
08h: Software Initiated [soft, cold, warm of forced cold]
09h: Setup Reset [Software Initiated Cold]
FFh: Unknown
Table 5-6:Kontron user SW upgrade status sensor
Event/Reading type
code Sensor type Sensor specific offset Event trigger
6Fh
CAh
OEM Kontron
External
Component
Firmware Upgrade
Status
00h Firmware Upgrade in Progress (no event)
01h Firmware upgrade succeeded
02h Firmware upgrade failed