Kontron KISS 2U Short KTQ67 - Manual (Page 26)

7. Product Description KISS 2U Short V2 – User’s Guide (V1.00)
7.4. Cover
The cover will be fixed to the chassis using two fixing brackets at the front side of the cover (Fig. 23, pos.3 and pos. 4),
the fixing brackets at the rear side of the cover (Fig. 23, pos.5 and pos. 7) and the cover fastening screw (Fig. 11, pos. 6)
at the front side of the KISS 2U Short V2 platform.
When inserting the cover, make sure that:
❏ At the front side: the fixing brackets (Fig. 23, pos. 4) are inserted properly into the corresponding cover retaining
plate of the chassis (Fig. 7 and Fig. 8 pos. 4).
❏ At the rear side: the centring latches and the cover retaining plate (Fig. 7 and Fig. 8, pos. 6 and pos. 9) are properly
inserted into the fixing bracket and centring slots of the cover (Fig. 23, pos.5 and 6).
The angled centering bracket (Fig. 23, pos. 3) and the front cover fastening screw Fig. 11, pos. 6) secure the cover on the
front side. The fixing brackets with knurled screws (Fig. 23, pos. 7) secure the cover on the rear side.
7
1
6
5
4 3 2
6
6
Fig. 23: Inside of the cover with fixing brackets
1 Inside of the cover
2 Front part of the cover
3 Angled centering bracket with tapped hole
(on the front side)
4 Fixing bracket (on the front side)
5 Fixing bracket (on the rear side)
6 Centring slots on the cover
7 Cover fixing brackets with knurled screws
In order to close the KISS 2U Short V2 platform chassis, ensure that the cover is reinstalled properly and
secured with following screws:
❏ the cover fastening screw (Fig. 11, pos. 6) and Fig. 25) on the front side
❏ the knurled screws (Fig. 15, pos. 6, Fig. 16, pos. 8 and Fig. 26) on the rear side
24 www.kontron.com