Kontron KISS 2U Short KTQ67 - Manual (Page 9)

4. General Safety Instructions for IT Equipment KISS 2U Short V2 – User’s Guide (V1.00)
4.
General Safety Instructions for IT Equipment
Please consider the instructions described in the included “General Safety Instructions for IT Equipment”.
Caution:
Energy hazards > 240 VA are present inside the chassis!
Activities such as system expansion with expansion cards, or maintanance have to be carried-out by
qualified personnel familiar with the associated dangers!
The installation instruction for the KISS 2U Short V2 platform is the responsibility of the distributor.
When used as intended the KISS 2U Short V2 platform is to operate only closed and locked.
Only when the cover is properly installed, secured with the knurled screws on the rear and the cover
fastening screw on the front, and the access panel is locked with the key, it is ensured that the user
doesn’t have access to the internal parts of the KISS 2U Short V2 platform, loaded with hazardous energy.
4.1. Operation of Laser Source Devices
Fig. 1: Warning about laser radiation
The optional DVD drive contain light-emitting diodes (classified in accordance with EN 60825-1/A2.2001: LASER CLASS 1)
and therefore must not be opened.
If the enclosure of such a drive is opened, invisible laser radiation is emitted. Do not allow yourself to be exposed to this
radiation.
The laser system meets the code of Federal Regulations 21 CFR, 1040 for the USA and the Canadian Radiation Emitting
Devices Act, REDR C 1370.
www.kontron.com 7