Kontron KISS Stor 0/5 - Manual (Page 19)

Product Description
18 KISS-Stor 0/5 – User’s Manual
Features
The KISS-Stor 0/5 supports the following features:
q Support three SATA-I or II disk channels (but run in SATA I).
q Support one SATA-I host channel
q
Support RAID level 0 and 5
q Drives are hot swappable (RAID 5)
q Fan cooler (Ball bearing type)
q Key locking to prevent unauthorized access to the disk drives
q
Audible alarm on drive failure
q Automatic drive failure detection
q Battery backup for disk rebuild status
Hard Drive Hot Swapping for RAID 5 Configuration
Hot Swapping allows, while KISS-Stor 0/5 is configured as a RAID 5 array, the
removal and installation of hard disk drives without powering down the system.
Automatic Drive Rebuilding for RAID 5 Configuration
While KISS-Stor 0/5 is configured and a member drive in a RAID 5 array is
replaced, the KISS-Stor 0/5 will automatically start to rebuild data to the new
drive.
RAID Failure audible Alarm
In the event that a drive fails, the corresponding red indicator turns on and an
alarm sounds. You can turn off the alarm by unlocking the drive carrier.