Kontron KISS Stor 0/5 - Manual (Page 25)

Components of the KISS-Stor 0/5
24 KISS-Stor 0/5 – User’s Manual
Components of the KISS-Stor 0/5
Drives Cage
The KISS-Stor 0/5 drives cage is designed to accommodate three 3.5 inch hard
disk drives (each SATA-HDD is mounted into a corresponding drive carrier).
3
1
2 6
5
1
4 6
Fig. 10: KISS-Stor 0/5 – Drives cage
without drive carriers (left side view)
Fig. 10a: KISS-Stor 0/5 – Drives cage
without drive carriers (right side view)
Legend for Fig. 10 and 10a:
1 Drives cage of the KISS-Stor 0/5
2 Holes for mounting screws on the
left side
3 Rail channel on the left side
4 Holes for mounting screws on the
right side
5 Rail channel on the right side
6 Guide ribs for drive carriers
Holes for Mounting Screws
The holes for mounting screws allows you to mount the KISS-Stor 0/5 drives cage
into the drive cage of the computer system by the supplied M3 metric screws.
Use only the supplied M3 metric screws (M3x5). Four
screws on each side are sufficient for mounting the KISS-
Stor 0/5 drives cage into the drive cage of the computer
system.