Mercedes-Benz E-Sedan 2010 Owners Manual - Manual (Page 140)

X Press button a again if you would like
to change the current status.
After the function has been activated, the
PRE-SAFE
® Brake indicator Ä appears
in the lower part of the multifunction
display. When the HOLD function is
switched on, the PRE-SAFE
® Brake
indicator Ä will not appear.
For more information on PRE-SAFE ® Brake,
see ( Y page 69).
Switching ATTENTION ASSIST on or off
X Press button = or ; to select the
DriveAssist menu.
X Press button : or 9 to select the
Attention Asst. function
X Press button a.
X Press button a again if you would like
to change the current status.
After the function has been activated, the
ATTENTION ASSIST indicator À appears
on the left-hand side of the multifunction
display.
For more information on ATTENTION ASSIST,
see (
Y page 178).
Switching Blind Spot Assist on or off
X Press button = or ; to select the
DriveAssist menu.
X Press button : or 9 to select the
Blind Spot Asst. function
X Press button a.
X Press button a again if you would like
to change the current status.
Depending on the previous status,
Blind
Spot Assist: will be Enabled or
Disabled.
For more information on Blind Spot Assist,
see (
Y page 175).
Switching Lane Keeping Assist on or off
X Press button = or ; to select the
DriveAssist menu.
X Press button : or 9 to select the
Lane Keep. Asst. function
X Press button a.
X Press button a again if you would like
to change the current status.
After the function has been activated, the
Lane Keeping Assist indicator Ã
appears in the lower part of the
multifunction display.
For more information on Lane Keeping
Assistance, see (
Y page 177).
Service menu
In the Serv. menu the following functions are
available:
138
Control system
Controls in detail
212_AKB; 2; 41, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 138