Mercedes-Benz E-Sedan 2010 Owners Manual - Manual (Page 147)

Removal, tampering, or altering of the
device will void any warranties, and is not
permitted. Do not tamper with, alter, or use
in any non-approved way.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
X Press button = or ; to select the
Sett. menu.
X Press button : or 9 to select the
Vehicle submenu.
X Press button a.
X Press button : or 9 to select the
Radar Sensor (See Oper. Manual):
function.
The current setting
Enabled or Disabled
is shown.
X Press button a again if you would like
to change the current status.
Depending on the previous status, the
radar sensors will be switched on
(
Enabled) or off (Disabled).
i The selected status of the radar sensors
remains stored in memory even if the
engine is turned off and restarted.
Convenience submenu
Access the Convenience submenu via the
Sett. menu. Use the Convenience submenu
to activate the easy-entry/exit feature
(
Y page 145) or to activate the seat belt
adjustment feature ( Y page 145).
Activating easy-entry/exit feature
Use this function to activate and deactivate
the easy-entry/exit feature (
Y page 93).
G Warning!
You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement, move
steering wheel adjustment stalk or press one
of the memory position buttons.
Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
X Press button = or ; to select the
Sett. menu.
X Press button : or 9 to select the
Convenience submenu.
X Press button a.
X Press button : or 9 to select the
Easy Entry/Exit: function.
The current setting
Enabled or Disabled
is shown.
X Press button a to change the current
status.
Depending on the previous status, the
Easy Entry/Exit: feature will be
Enabled or Disabled.
Activating/deactivating seat belt
adjustment function
Use this function to set the seat belts to be
adjusted automatically with the driver’s or
front passenger seat belt fastened and the
starter switch in position
2.
For more information on the seat belt
adjustment function, see (
Y page 51).
Control system
145
Controls in detail
212_AKB; 2; 41, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 145
Z