Mercedes-Benz E-Sedan 2010 Owners Manual - Manual (Page 272)

X Removing vehicle tool kit box: Pull
tab : in direction of arrow ; and lift
vehicle tool kit box D.
X Remove vehicle tool kit box D from
luggage bowl E.
X Opening vehicle tool kit box cover: Pull
tab B in direction of arrow A and open
vehicle tool kit box cover =.
X Closing vehicle tool kit box cover: Push
vehicle tool kit box cover = downward
until it engages into vehicle tool kit box
D.
X Installing vehicle tool kit box: Slide
vehicle tool kit box D into the recess of
luggage bowl E.
X Push vehicle tool kit box D downward until
it engages into luggage bowl E.
E 63 AMG
:
Towing eye bolt
; Pair of gloves
=
Jack
? Collapsible wheel chock
A
Alignment bolt
B Protective wrap
C
Electric air pump
D Wheel wrench
E
Fuse chart
Collapsible wheel chock
The collapsible wheel chock serves to secure
the vehicle, e.g. while changing a wheel.
X Take the collapsible wheel chock from the
vehicle tool kit (
Y page 268).
X Setting up: Tilt both plates upward :.
X Fold the lower plate outward ;.
X Guide the tabs of the lower plate all the way
into the openings of base plate =.
For information on where to place wheel
chocks when changing a wheel, see “Lifting
the vehicle” (
Y page 324).
Jack
G Warning!
Only use the jack supplied with your vehicle
to lift the vehicle briefly for wheel changes. If
you use the jack for any other purpose, you or
others could be injured, as the jack is
designed only for the purpose of changing a
wheel.
When using the jack, observe the safety notes
in the “Mounting the spare wheel” section and
the notes on the jack.
X Take the jack from the vehicle tool kit
(
Y page 268).
270
Where will I find ...?
Practical hints
212_AKB; 2; 41, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 270