Setting ambient lighting, On or off, Controls in detail – Mercedes-Benz E-Sedan 2010 Owners Manual User Manual

Page 145: Control system

Advertising
background image

If, after turning off the engine, you do not
open or close a door, the lamps will
automatically go out after 60 seconds.

The following lamps will come on

R

Parking lamps

R

Tail lamps

R

License plate lamps

R

Side marker lamps

R

Front fog lamps

X

Press button = or ; to select the
Sett. menu.

X

Press button : or 9 to select the
Lights submenu.

X

Press button a.

X

Press button : or 9 to select the
Locator Lighting: function.
The current setting

Enabled or Disabled

is shown.

X

Press button a to change the current
status.
Depending on the previous status, the

Locator Lighting: function will be

Enabled or Disabled.

You can temporarily deactivate the
headlamps delayed shut-off feature:

X

Before exiting the vehicle, turn the
SmartKey in the starter switch to
position

0.

X

Then turn it to position

2 and back to

position

0.

The headlamps delayed shut-off feature is
deactivated. It will reactivate as soon as
you start the engine.

Setting ambient lighting
Use this function to adjust the brightness of
the ambient lighting.

X

Press button = or ; to select the
Sett. menu.

X

Press button : or 9 to select the
Lights submenu.

X

Press button a.

X

Press button : or 9 to select the
Ambient Light Brightness: function.

X

Press button a.

X

Press button : or 9 to set the
Ambient Light Brightness: .
The setting

Level 1 represents the darkest

level and setting

Level 5 the brightest

level. The ambient light is switched off at
setting

Disabled.

Switching interior lighting delayed shut-

off on or off
Use this function to set whether you would
like the interior lighting to remain on for
10 seconds during darkness after you have
removed the SmartKey from the starter
switch.

X

Press button = or ; to select the
Sett. menu.

X

Press button : or 9 to select the
Lights submenu.

X

Press button a.

X

Press button : or 9 to select the
Interior Lighting Delay: function.
The current setting

Enabled or Disabled

is shown.

Control system

143

Controls in detail

212_AKB; 2; 41, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-17T09:14:21+02:00 - Seite 143

Z

Advertising