4 setting the system time and date, Setting the system time and date, 52 pm – Rice Lake 920i Bulkweigher 107 - 108 - 109 User Manual
Page 17
Setup Menu
13
3.1.4 Setting the System Time and Date
Use the following steps to set up the system time and date.
1. From the main setup menu screen, press the
Time/Date
softkey.
04/17/2012
02:16 PM
SCALE #1
ID#1
More =>
0
SCALE #1
Gross
Lb
SETUP MENU
Time/Date
Setup
Password
ID#2
Program: Express
ID #1 (Disabled)
ID #2 (Disabled)
Slow Cycle Time (sec): 45.0
Delay After Fill (sec): 3.0
Delay After Discharge (sec): 30
Discharge Delay (sec): 3.0
Subtotal Print: 3
Figure 3-5. Select Time/Date Softkey
2. Use the
UP-DOWN-LEFT-RIGHT
arrow keys on the 920i and the numeric keypad to modify the time and/or
date.
3. Press
enter
to save your settings.
Cancel
03:52 PM
04/27/2011
Figure 3-6. Time and Date Main Screen
Note
Press Cancel softkey at any time to exit this sequence without saving any changes
.