Rice Lake 920i Bulkweigher 107 - 108 - 109 - Manual (Page 5)

Safety 1
1.0 Introduction
This manual is intended for use by service technicians and operators responsible for installing and operating the
Flexweigh Bulkweigher Systems 107, 108, and 109. The 920i
® with custom programming can serve three different
systems based on inputs that are wired when built.
Additional information on the hardware features of the 920i are explained in the 920i Installation and Operation
Manual (PN 67887) and is included with this product.
1.1 Safety
Safety Symbol Definitions:
WARNING
Important
CAUTION
WARNING
Indicates a potentially hazardous situation that, if not avoided could result in serious injury or death, and
includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided may result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or
corruption to and loss of data.
Safety Precautions
Do not operate or work on this equipment unless you have read and understand the instructions and
warnings in this manual. Failure to follow the instructions or heed the warnings could result in injury or
death. Contact any Rice Lake Weighing System dealer for replacement manuals. Proper care is your
responsibility.
General Safety
Failure to heed may result in serious injury of death.
Some procedures described in this manual require work inside the indicator enclosure. These procedures are to be
performed by qualified service personnel only.
DO NOT allow minors (children) or inexperienced persons to operate this unit.
DO NOT operate without all shields and guards in place.
DO NOT step on the unit.
DO NOT jump on the scale.
DO NOT use for purposes other then weight taking.
DO NOT place fingers into slots or possible pinch points.
DO NOT use any load bearing component that is worn beyond 5% of the original dimension.
DO NOT use this product if any of the components are cracked.
DO NOT exceed the rated load limit of the unit.
DO NOT make alterations or modifications to the unit.
DO NOT remove or obscure warning labels.
Before opening the unit, ensure the power cord is disconnected from the outlet.
Keep hands, feet and loose clothing away from moving parts.