Rice Lake 920i Installation Manual V2.0 - Manual (Page 100)

96 920i Installation Manual
10.2 Regulatory Mode Functions
The function of the front panel TARE and ZERO keys depends on the value speciÞed for the REGULAT
parameter on the FEATURE menu. Table 10-4 describes the function of these keys for the NTEP, CANADA,
OIML, and NONE regulatory modes.
TARE and ZERO key functions are conÞgurable when the REGULAT
mode is set to INDUST (see Table 10-5 on page 96).
Table 10-5 lists the subparameters available when conÞguring a scale using INDUST mode. The table includes
the default values of the INDUST subparameters and the effective (not conÞgurable) values used by the NTEP,
CANADA, OIML, and NONE regulatory modes.
REGULAT
Parameter Value Weight on Scale Tare in System
Front Panel Key Function
TARE ZERO
NTEP zero or negative no no action ZERO
yes CLEAR TARE
positive no TARE
yes TARE
CANADA zero or negative no no action ZERO
yes CLEAR TARE
positive no TARE
yes no action
OIML zero or negative no no action ZERO
yes CLEAR TARE ZERO and CLEAR TARE
positive no TARE ZERO
yes TARE ZERO and CLEAR TARE
NONE zero or negative no TARE ZERO
yes CLEAR TARE
positive no TARE
yes CLEAR TARE
Table 10-4. TARE and ZERO Key Functions for REGULAT Parameter Settings
REGULAT / INDUST Parameter REGULAT Mode
Parameter Name Text Prompt INDUST NTEP CANADA OIML NONE
SNPSHOT Display or Scale weight source DISPLAY DISPLAY DISPLAY DISPLAY SCALE
HTARE Allow tare in display hold NO NO NO NO YES
ZTARE Remove tare on ZERO NO NO NO YES NO
KTARE Allow keyed tare with load on scale NO YES NO YES YES
MTARE Multiple tare action REPLACE REPLACE NOTHING REPLACE REMOVE
NTARE Allow negative tare NO NO NO NO YES
CTARE Allow CLEAR key to clear
tare/accumulator NO YES NO NO YES
PRTMOT Allow print while in motion NO NO NO NO YES
PRTPT Add PT to keyed tare print NO NO YES YES NO
PRTHLD Print during display hold NO NO NO NO YES
HLDWGH Allow weigh during display hold NO NO NO NO YES
MOTWGH Allow weighment in motion NO NO NO NO NO
Table 10-5. REGULAT / INDUST Mode Parameters, Comparison with Effective Values of Other Modes