Rice Lake 920i Installation Manual V2.0 - Manual (Page 75)

Setpoints 71
SETPTS Menu
Parameter Choices Description
Level 2 submenus
SETPT 1–
SETPT 100 OFF
GROSS
NET
–GROSS
–NET
ACCUM
ROC
+REL
–REL
%REL
RESREL
PAUSE
DELAY
WAITSS
COUNTER
AUTOJOG
COZ
INMOTON
INRANGE
BATCHPR
TIMER
CONCUR
DGIN
AVG
TOD
DELTA
CHKWEI
PLSCNT
PLSRAT
ALWAYS
NEVER Specifies the setpoint kind.
GROSS, NET, –GROSS, –NET, ACCUM, ROC, +REL, –REL, %REL, RESREL. DIGIN,
AVG, and TOD setpoint kinds can be used as either batch or continuous setpoints.
PAUSE, DELAY, WAITSS, COUNTER, AUTOJOG, DELTA, PLSCNT, ALWAYS, and
NEVER setpoint kinds can only be used in batch sequences.
COZ, INMOTON, INRANGE, BATCHPR, TIMER, CONCUR, PLSRAT, and CHKWEI
setpoint kinds can only be used as continuous setpoints.
See Table 8-1 on page 60 for more information about setpoint kinds.
BATCHNG OFF
AUTO
MANUAL Batching enable. Set to AUTO or MANUAL to allow a batch sequence to run.
MANUAL requires a BATSTRT digital input, BATSTART serial command,
Batch
Start softkey, or the StartBatch function in an iRite program before the batch
sequence can run. AUTO allows batch sequences to repeat continuously.
Table 8-2. Setpoint Menu Parameters