Rice Lake 920i Installation Manual V2.0 - Manual (Page 49)

Configuration 45
3.2.8 Version Menu
The VERS menu can be used to check the installed software version or, by using the Reset Config softkey, to
restore all conÞguration parameters to their factory default values. There are no parameters associated with the
Version menu: when selected, the indicator displays the installed software version number.
Figure 3-16. Version Menu
The Contact softkey on the Version menu allows display of contact information (see ÒFEATURE Menu,
CONTACT SubmenuÓ on page 38). If an iQUBE scale is conÞgured, a Diagnostics softkey also provides access
to iQUBE diagnostic information.
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O ALGOUT VERS
Software
version