Rice Lake 920i Installation Manual V3.13 User Manual
Page 13
Introduction
7
Version 3.00
• The de sktop mo del of the
920i
ha s been
discontinued. Drawings and parts lists for the
desktop model have been removed from this
manual.
• Added support for
multi-range and
multi-interval scale configurations.
• Zero tracking, zero rang e, and moti on band
parameters (SCALES menu) have been
changed to allow numeric values.
• Added peak hold function to SCALES menu.
• Added last zero and temporary zero functions
to calibration menus to allow recalibration
based on previous zero values.
• Enhanced pri nt formatting wi th addition of
audit format and twenty auxiliary formats.
• The SERIAL menu has been re structured to
provide additional parameters for configuring
RS-485 communications. See Figure 3-10 on
• A new digital input count (DINCNT) setpoint,
used to count digital input pulses, has been
added to the supported setpoint kinds. See
• A SENSE p arameter has be en ad ded to
optionally invert the value of setpoint digital
outputs. See Section 8.0 on page 67.
• TRIGGER (digital output tri gger) has been
added as a selection under the DIG I/O menu
(see Section 3.2.6 on page 47) for custom
applications.
• Support has been ad ded for EtherNet/IP and
analog input/thermocouple option cards.