Rice Lake TP Series, Rice Lake Weighing Systems - Balance Manual - Manual (Page 10)

6 TP Series Balance
2.0 Operation
Key representations may differ depending on whether the NTEP or non-NTEP version of the scale is in use.
2.1 Assembly
1. Mount the pan base on the main unit of the balance and place the measurement pan on top of it. Be sure to mount the
pan base in the correct direction as illustrated below.
Figure 2-1. Mount the Pan Base on the Main Unit of the Balance
2. Insert one small panel into one large panel – the edge with the step should face the same side.
3. Connect the other large panel to the two that are assembled.
4. Connect the last small panel with the other three that are assembled.
Note